Fluides pour transmissions et transmissions de puissance à usage intensif aux performances éprouvées
Les produits Delo TorqForce sont des fluides pour transmissions et transmissions de puissance à usage intensif aux performances éprouvées, conçus pour les boîtes, ponts et circuits hydrauliques des matériels Allison, Caterpillar, Dana Powershift, Komatsu, Komatsu Dresser, Tremec/TTC, Vickers et ZF.
Les produits Delo TorqForce sont formulés à partir d'huiles de base premium associées à des additifs détergents et dispersants, des inhibiteurs d'oxydation et de corrosion, des agents anti-usure, extrême pression et antimousse.
Avantages
- Le pack d'additifs éprouvé protège les surfaces métalliques contre le grippage et l'usure à haute température et sous forte charge
- Un contrôle fiable de la friction évite le patinage de l'embrayage et assure un fonctionnement silencieux et efficace de la transmission et des freins tout en réduisant l'usure
- La formulation à base d'huiles de haute qualité offre une protection robuste contre l'oxydation à haute température et prolonge la durée de vie de l'huile
- Formulé pour maintenir les pièces métalliques propres et exemptes de vernis et de boues pouvant provoquer une défaillance prématurée
Applications
- drives and axles in off-road service is their newer
- Delo TorqForce products are proven performance lubricant performance specification FD-1 – Delo lubricants designed for use in transmissions, final TorqForce FD meets this specification. TO-4 type drives, and hydraulic systems requiring a fluid meeting lubricants are still acceptable, although with a shorter Caterpillar TO-4 or Allison C-4 requirements. They are drain interval. also recommended for transmission and hydraulic systems manufactured by Dana Powershift, Komatsu, Approvals, performance and Komatsu Dresser, Tremec/TTC, Vickers and ZF recommendations
- Delo TorqForce products are designed for both newly
- Le choix du grade de viscosité dépend de la température ambiante et de la sévérité du service. Les recommandations figurent ci-dessous :
- SAE grade 10W 30 50
- Outside temperature range, °C Min Max Min Max Min Max
- Hydraulic systems -20 +40 -10 +50 — —
- Hydrostatic transmissions -20 +40 — — — —
- Powershift transmissions -20 +10 0 +35 +10 +50
- Final drive/Differential/Gearboxes -30 0 -20 +25 0 +50 (except for off-highway trucks)
- Final drive (off-highway trucks) -30 -10 -20 +15 0 +50
Spécifications
- Allison
- Caterpillar
- Dana Powershift
- Eaton
- Komatsu
- Komatsu Dresser
- Meritor (Rockwell)
- Tremec/TTC
- Vickers
- Volvo
Homologations
- developed and older model drive train components SAE
- They offer robust friction retention, wear control, seal
- ZF compatibility, oxidation stability, and viscosity stability
- The frictional characteristics of the fluid are designed to be retained over the life of the lubricant
- Delo TorqForce products are formulated to help protect SAE against wear, even in severe service conditions and
- Allison under high loads. They offer improved protection to precision parts against wear under high load conditions
- Caterpillar by helping control the formation of corrosion, varnish,
- Volvo and sludge
- Delo TorqForce products are compatible with new and Recommendations traditional seal and clutch materials SAE
- In order to meet Caterpillar specifications, Delo
- Dana TorqForce products are not friction modified
- Eaton Therefore, they are not recommended for equipment manual made by other OEMs who require friction modified fluids in order to assure smooth and quiet brake
- Komatsu operation. For these applications, use 1000 THF or
- Komatsu Super Universal Tractor Oil Extra 10W-30. (Note too that the reverse is also true - friction-modified fluids like
- Meritor these should not be used in Caterpillar TO-4 Manual applications)
- Tremec/TTC
- Delo TorqForce SAE 10W may also be used as a
- Vickers substitute for Cat HYDO 10W in hydraulic system
Valeurs typiques
| Test |
Test Methods |
Results |
| Viscosity Grade |
SAE 30 |
| Shelf Life: 60 months from date of filling indicated on the product label. |
| Density, 15°C, kg/l |
ASTM D4053 |
0.883 |
| Pour Point, °C |
ASTM D5950 |
-27 |
| Flash Point COC, °C |
ASTM D92 |
≥225 |
| Viscosity, Kinematic, 100°C, mm²/s |
ASTM D445 |
10.9 |
| Viscosity, Kinematic, 40°C, mm²/s |
ASTM D445 |
88 |
| Viscosity Index |
ASTM D2270 |
110 |
Source : PDS 18 novembre 2019 · Fiche technique produit
Attention : pour les informations PDS les plus récentes, rendez-vous sur https://cglapps.chevron.com/sdspds/HomePage.aspx?tab=pds
