Capella A 68

prijzen beschikbaar bij inloggen

Capella A 68 is een volledig synthetische olie voor de smering van koel-, vries- en airconditioning compressoren die ammoniak als koelmedium gebruiken en is samengesteld op basis van hoogwaardige Poly-Alfa-Olefinen (PAO).

Volledig synthetisch hoogwaardig smeermiddel voor koelcompressoren

Voordelen

  • De volledig synthetische formulering zorgt voor thermische en chemische stabiliteit in aanwezigheid van ammoniak
  • Het zeer lage vloeipunt zorgt voor betrouwbare prestaties in moderne ammoniakkoelinstallaties met zeer lage temperaturen
  • De hoge viscositeitsindex draagt bij aan de smeerprestaties en de bescherming van het systeem bij hoge bedrijfstemperaturen
  • Vloeibaarheid bij lage temperatuur helpt het energieverbruik te beperken en beschermt het systeem bij koude starts
  • De lage vluchtigheid ten opzichte van zuivere minerale oliën zorgt voor een lager olieverbruik
  • De hoogwaardige chemische stabiliteit optimaliseert de warmteoverdracht

Toepassingen

  • Capella A 68 is geschikt voor koelinstallaties op ammoniak
  • Capella A 68 wordt aanbevolen voor koel- en airconditioningsystemen die smeermiddelen met goede lagetemperatuureigenschappen vereisen
  • Capella A 68 voldoet aan de lagetemperatuureisen van ammoniakkoelsystemen
  • Capella A 68 is bijzonder geschikt voor zuiger- en schroefcompressoren met perstemperaturen boven +100 °C
  • Note: Capella A can contribute to seal shrinking which can the compatibility of seals with PAO based Capella A, the equipment Capella A may be used with R-22 refrigerant, but only if this manufacturer and where the evaporator temperature is higher

Goedkeuringen

  • DIN 51503-1 lead to leakage. When there is doubt regarding manufacturer should be consulted. is expressly recommended by the compressor than –20°C (R22)

Typische testwaarden

Test Test methods Results
Viscosity Grade 68
Kinematic viscosity, 40°C, mm 2 /s ASTM D445 68
Kinematic viscosity, 100°C, mm 2 /s ASTM D445 10.6
Viscosity Index ASTM D2270 140
Flash Point COC, °C ASTM D92 260
Pour Point, °C ASTM D97 -54
Density, 15°C, kg/l ASTM D4052 0.834

Bron: PDS 23 december 2010 · Productinformatieblad

Opgelet: voor de meest recente PDS-informatie, ga naar https://cglapps.chevron.com/sdspds/HomePage.aspx?tab=pds