Rust Proof Compound L

prijzen beschikbaar bij inloggen

Rust Proof Compound L is a proven performance calcium soap of an oxidised wax, which is cut back to 60 % solids using a +72°C to +80°C flashpoint aliphatic solvent. It is formulated to meet the requirements of MIL-C-16173D-4 and associated specifications for automotive cavity protection.

Corrosiewerende wasverbinding met bewezen prestaties

Rust Proof Compound L is a proven performance soap of an oxidised wax, which is cut back to 60 using a +72°C to +80°C flashpoint aliphatic solvent. formulated to meet the requirements of MIL-C-16173D-4 and associated specifications for automotive cavity protection.

Rust Proof Compound L helps prevent metal corrosion wind turbine bases, railway sleeper bolts, drill pipes aids protection of automotive under-body cavities. been softened to a grease-like material and can be by brush or by airless spray-gun, without having to product.

Voordelen

  • Vormt een waterdichte, niet-uithardende, zelfafdichtende laag
  • Kruipt in naden en voegen
  • Dringt door in bestaande roest
  • Verweert niet en zal niet uitharden, barsten, afbladderen, wegglijden of afspringen

Toepassingen

  • Overal waar ijzer of staal aan de buitenlucht wordt blootgesteld, binnen of buiten, treedt roestvorming op. Rust Proof Compound L beschermt daartegen vóór, tijdens en na de verwerking tot afgewerkte onderdelen
  • Het product kan worden verdund met een koolwaterstofoplosmiddel zoals white spirit

Specificaties

  • MIL-C-16173D-4
  • It has applied heat the film

Prestaties

  • dry conditions away from other combustible materials,
  • Meets the requirements of MIL-C-16173D-4 heat and direct sunlight. Protect from frost
  • Storage and handling | • When stored in the recommended manner, a small degree of footing of the product may occur over time,
  • How should the product be applied? | but this will not detract from the performance of the fluid in service
  • The inside of tanks must first be cleaned and dried, before a thin layer of rust proof compound is applied. | • Note: During storage a liquid brown layer can be formed
  • For restoration of old structures, the metal surface is | on top of the product. This can be easily mixed back in sand blasted and coated with a metal paint. Over this | using moderate stirring. If there is a need to make paint layer the rust proof compound L is applied. | application easier then additional dilution can be carried using an aliphatic solvent. Since Rust Proof Compound
  • L is thixotropic, during storage the product can become harder; remixing will soften the product
  • Het product is gevoelig voor de opslagtemperatuur. Bij lage temperaturen kan het hard worden; bij warmere opslag wordt het weer zachter

Typische testwaarden

Test Test Methods Results
Rust Proof Compound L
Shelf Life: 24 months from date of filling indicated on the product label.
Appearance Visual Soft, brown, solid
Pour point, °C (pure product) ASTM D127 25
Density, 20 °C, Kg/l ASTM D1298 0.91
Active content, % — 57-63
Colour ASTM D1500 Max 7.5
Flash point, °C ASTM D92 ≥75
Salt fog resistance, hrs ASTM B117 500 at 40 µm
Solvent % ST0127 40
Solvent Type — Kero
Melting point (supplied), °C ASTM D127 25-35

Bron: PDS 16 juni 2016 · Productinformatieblad

Opgelet: voor de meest recente PDS-informatie, ga naar https://cglapps.chevron.com/sdspds/HomePage.aspx?tab=pds