Meropa 100

for Inland Shipping
prices available on login

Meropa® lubricants are premium-quality gear lubricants that have been specially developed to meet the demanding load-carrying requirements of gear manufacturers. Meropa lubricants are manufactured from high-quality base oils and have low pour points. They contain an additive combination that enhances oiliness, extreme pressure, and anti-wear properties. Meropa lubricants have a high oxidation, thermal, and hydrolytic stability, good water-separating characteristics, good air release and anti-foam properties, which helps to protect against metal corrosion and rusting.

Premium performance extreme pressure gear lubricants

Meropa ® gear lubricants are premium quality extreme pressure industrial gear oils formulated to help provide good load carrying capacity, water demulsibility, oxidation stability and corrosion protection.

Benefits

  • High thermal stability extreme pressure (EP) system is designed to help maintain clean gear and bearing surfaces, helping to minimise deposit formation
  • High oxidation stability helps reduce in-service viscosity increases, which can optimise energy efficiency
  • Effective wear and corrosion inhibiting formulation is designed to help extend equipment life and reduce maintenance downtime
  • Offers extended drain intervals through reduced oxidation even in extreme pressure applications

Applications

  • Meropa gear lubricants are recommended for: industrial enclosed gearing where an AGMA extreme pressure lubricant is specified bath, splash, circulating, or spray mist lubrication as applicable to the proper viscosity grade general industrial plant lubrication where the performance properties of an AGMA extreme pressure lubricant is required
  • Rexnord gear drives requiring a mineral-based extreme pressure lubricant

Typical test data

Test Test Methods
Viscosity Grade 100
Typical Shelf Life: 60 months from date of filling indicated on the product label*
AGMA Grade 3 EP
Density at 15°C, kg/L ASTM D4052 0.8849
Viscosity, Kinematic cSt at 40°C
100
cSt at 100°C ASTM D445
11.4
Viscosity Index ASTM D2270 100
Flash Point, °C ASTM D92 250
Pour Point, °C ASTM D97 -29
Foam Test, Seq. II Tendency, mL 50
Stability, mL ASTM D892 max
0
Water Separation Minutes to 3 mL
emulsion ASTM D1401 20
Copper Corrosion 3 h @ 100°C
ASTM D130 1B
ASTM D665A Pass
Rust Test
ASTM D665B Pass
4 Ball Weld
250
Weld Point, kg Load Wear Index ASTM D2783
>45
FE-8 Bearing Test Roller weight loss,
mg DIN51819-3 3.7**
FZG Scuff Test, A/8.3/90°C,
Fail Stage ASTM D5182 >14
FZG Pass Stage ASTM D5182 12
Test Test Methods
Viscosity Grade
Typical Shelf Life: 60 months from date of filling indicated on the product label*
AGMA Grade
Density at 15°C, kg/L ASTM D4052
Viscosity, Kinematic cSt at 40°C
ASTM D445
cSt at 100°C
Viscosity Index ASTM D2270
Flash Point, °C ASTM D92
Pour Point, °C ASTM D97
Foam Test, Seq. II Tendency, mL Stability,
ASTM D892
mL
Water Separation Minutes to 3 mL
ASTM D1401
emulsion
Copper Corrosion 3 h @ 100°C ASTM D130
ASTM D665A
Rust Test
ASTM D665B
4 Ball Weld
ASTM D2783
Weld Point, kg Load Wear Index
FE-8 Bearing Test Roller weight loss, mg DIN51819-3
FZG Scuff Test, A/8.3/90°C,
ASTM D5182
Fail Stage
FZG Pass Stage ASTM D5182

Source: PDS 26 March 2024 · Product Data Sheet

Opgelet: voor de meest recente PDS-informatie, ga naar https://cglapps.chevron.com/sdspds/HomePage.aspx?tab=pds