Rust Proof Compound L

Proven performance anti-corrosive wax compound

Rust Proof Compound L is a proven performance soap of an oxidised wax, which is cut back to 60 using a +72°C to +80°C flashpoint aliphatic solvent. formulated to meet the requirements of MIL-C-16173D-4 and associated specifications for automotive cavity protection.

Rust Proof Compound L helps prevent metal corrosion wind turbine bases, railway sleeper bolts, drill pipes aids protection of automotive under-body cavities. been softened to a grease-like material and can be by brush or by airless spray-gun, without having to product.

Benefits

• Forms a waterproof, non-hardening, self-sealing
• Creeps into seams
• Penetrates existing rust
• Will not weather, harden, crack, peel, slide or chip

Applications

• Wherever iron or steel is exposed to the atmosphere, inside or outside, it is subjected to rusting. Rust Proof Compound L can protect against this before, during and after manufacturing into finished parts
• The product can be “thinned” using hydrocarbon solvent such as white spirit

Specifications

• MIL-C-16173D-4
• It has applied heat the film

Performance

• dry conditions away from other combustible materials,
• Meets the requirements of MIL-C-16173D-4 heat and direct sunlight. Protect from frost
• Storage and handling | • When stored in the recommended manner, a small degree of footing of the product may occur over time,
• How should the product be applied? | but this will not detract from the performance of the fluid in service
• The inside of tanks must first be cleaned and dried, before a thin layer of rust proof compound is applied. | • Note: During storage a liquid brown layer can be formed
• For restoration of old structures, the metal surface is | on top of the product. This can be easily mixed back in sand blasted and coated with a metal paint. Over this | using moderate stirring. If there is a need to make paint layer the rust proof compound L is applied. | application easier then additional dilution can be carried using an aliphatic solvent. Since Rust Proof Compound
• L is thixotropic, during storage the product can become harder; remixing will soften the product
• The product is sensitive to storage temperatures. If stored at lower temperatures, the compound can be hard; storing in warmer conditions will allow it soften

Typical test data

Source: PDS 16 June 2016 · Product Data Sheet

Opgelet: voor de meest recente PDS-informatie, ga naar https://cglapps.chevron.com/sdspds/HomePage.aspx?tab=pds