Way Lubricant X 68

prices available on login

Way Lubricant X is an efficient performance machine tool slideway lubricant, formulated with highly refined mineral base oils, friction modifiers, extreme pressure and anti-rust additives, with tackiness agents, and corrosion inhibitors.

Efficient performance machine tool slideway lubricant

Way Lubricant X offers good demulsibility properties for rapid separation from coolants, reducing the possibility of bacteria growth due to oil contamination.

Benefits

  • Friction modifiers contribute smooth high lubricity, helping reduce friction, drag, stick-slip and chatter, improving workpiece finish
  • Tackiness additives provide high oil film strength and assist in accurate table positioning and lubricant stability on vertical slideways
  • EP additives maintain tough oil film protection on slideways and guides helping resist scoring and wear under heavy loads
  • Rust and corrosion inhibitors, combined with an adhesive oil film, assist in maintaining robust machine protection
  • Adhesive performance helps ensure lubricant resists fluid washout, and squeeze-out under heavy loads
  • Formulation aids rapid separation from coolants, helping increase cutting fluid life and reduce bacteria growth in contaminated oil
  • Compatible with most industrial soluble oils and coolants

Applications

  • Machine tool slideways and guides: - Horizontal slideways (ISO 68) - Light-to-moderate applications (ISO 68) - Vertical slideways (ISO 220) - More severe applications (ISO 220)
  • Suitable for use with Bijur Automatic Lubricant delivery systems. Other industrial applications requiring an adhesive, corrosion inhibited lubricant with EP properties:
  • Damping fluid for wind turbines (ISO 320)

Specifications

  • Cincinnati Machine
  • DIN
  • General Motors
  • ISO
  • SKC

Approvals

  • Cincinnati Machine Specification P-47 Heavy-Medium Way Oil (ISO 68)
  • Cincinnati Machine Specification P-50 Heavy Way Oil (ISO 220)
  • DIN 51524 part II: as hydraulic oil
  • General Motors LS-2
  • SKC
  • DIN 51 502: CG
  • ISO 6743-13: ISO-L-GA

Typical test data

Test Test methods Results
Viscosity Grade 68
Kinematic viscosity at 40°C, mm²/s ASTM D445 67.77
Kinematic viscosity at 100°C, mm²/s ASTM D445 9.33
VI ASTM D2270 115
Flash Point, °C ASTM D92 224
Pour point, °C ASTM D5950 -37
Steel corrosion, A ASTM D665A Pass
Copper corrosion 3h/100°C ASTM D130 1B
FZG A/8.3/90, Load stage DIN 51 354 > 12
TAN, mg KOH/g ASTM D664 0.57

Source: PDS 21 February 2017 · Product Data Sheet

Opgelet: voor de meest recente PDS-informatie, ga naar https://cglapps.chevron.com/sdspds/HomePage.aspx?tab=pds