Meropa EliteSyn WS 220

for Inland Shipping
prices available on login

Meropa EliteSyn WS is a premium performance synthetic industrial gear lubricant range offering reliable performance under demanding operating conditions.

Premium performance synthetic industrial gear lubricant

Meropa ® EliteSyn WS is a premium performance synthetic industrial gear lubricant range offering good performance under demanding operating conditions. Meropa EliteSyn WS is formulated with water soluble polyalkylene glycols, and promotes robust micro-pitting resistance, extreme pressure (EP) performance and thermal stability with good corrosion protection. With very low coefficients of friction of water soluble polyglycols, Meropa EliteSyn WS contributes to lower mechanical losses and higher efficiencies in many applications. Available in ISO 150, 220, 320, 460 and 680.

Benefits

  • Advanced formulation for longer oil service life when compared to mineral oils, helping reduce service costs
  • Formulated to help minimise micro-pitting, offering longer component service life with reduced maintenance
  • Formulated to help provide a premium EP protection, contributing to a reduced downtime
  • High thermal stability and oxidation resistance contribute to improved oil service life
  • Minimal harmful sludge and deposit formation offers keep-clean performance
  • Contributes to premium wear and helps provide corrosion protection and optimise equipment life

Applications

  • Meropa EliteSyn WS industrial gear oils are suitable Product maintenance and handling for a range of gear designs, including helical, bevel Meropa EliteSyn WS is a PAG gear lubricant which is helical, planetary, worm gears, and marine gear units. not compatible with mineral oils or most other synthetic
  • Meropa EliteSyn WS is also suitable for use in lubricant types. A change over procedure is available on applications such as fill for life disposable gearboxes, request. textile machines, chain and conveyor systems, kilns and ovens, sliding bearings and roller bearings in high There is an incompatibility between PAGs and AL due to load/EP applications. the high polarity of Polyglycol with regard to lubricated "tribo components" (friction partners steel to Al material) like bearing cages or worm gear drives and therefore the combination is not allowed!

Approvals

  • surfaces in direct contact with a steel shaft - are
  • EliteSyn WS. Please check with the customer/OEM
  • Flender T 7300 A-b (Revision 16) (Helical-, Bevel- and Planetary Gear Units) Meropa EliteSyn WS should preferably not be mixed
  • Flender T 7300 B-b (Revision 16) with other polyglycol based lubricants in order to (Worm Gear Units) preserve the premium properties of Meropa Elitesyn WS. Performance Mixing with other PAG based gear oils could result in a

Performance

  • change in appearance. Please note that possible
  • DIN | 51 517/3: CLP PG haziness has no influence on the performance of
  • ISO 6743-6 and ISO 12925-1: | Meropa EliteSyn WS
  • CKC,CKD,CKE,CKSMP,CSPG, CTPG
  • Meropa EliteSyn WS does not affect common seal and
  • David brown | Type G lubricants gasket materials. The use of Nitrile Rubber (NBR),
  • Fluoro-Silicone or Vinyl-Methyl Polysiloxane (Q) is recommended for high temperature applications
  • The product is not compatible with polyurethane based elastomers, leather, cork, asbestos, paper and board
  • It is recommended to use Meropa EliteSyn WS in gearboxes where the internal surface is unpainted or coated with resistant materials, for example a resistant two-pack epoxy formulation

Typical test data

Test Test Methods Results
Viscosity Grade 220
Shelf Life: 36 months from date of filling indicated on the product label
Appearance Visual Bright & Clear yellow liquid
Density, 15 °C, kg/l ASTM 4052 1.058
Viscosity, Kinematic at 40 ºC, ASTM D445 230
mm²/s
Viscosity, Kinematic at 100 ºC, ASTM D445 42
mm²/s
Viscosity Index ASTM D2270 235
Colour ASTM D6045 0.5
Flash Point COC, ºC ISO >290
Pour point, °C ASTM D5950 -42
FE8 bearing roller wear,<30 mg DIN 51819-3 Pass
FZG load stage, A/ 8.3/90 DIN 51354 >14
FZG Micro-pitting, 90°C FVA nr 54 I- >10
high high high
Damage Load stage IV High High

Source: PDS 04 April 2023 · Product Data Sheet

Opgelet: voor de meest recente PDS-informatie, ga naar https://cglapps.chevron.com/sdspds/HomePage.aspx?tab=pds