About Kockelmann Lubricants
About Texaco Lubricants
Industrial and Energy
Agriculture and Forestry
All Product Ranges
Adblue & Optispray
Lubewatch Oil Analyisis
Intensive shampoo with drying effect
Highly concentrated, highly foaming shampoo with self-drying effect for trucks, buses and other commercial vehicles. Environmental dirt, oil, grease and other dirt from the street are removed effectively and quickly, while at the same time caring for the bodywork paint.
At the same time, the shampoo acts as a "gliding agent" between the wash brush and the paintwork, thus ensuring a gentle wash. The same washing process also has a self-cleaning effect on the wash brushes. The product's odorant leaves a pleasantly fresh smell in the wash area.
Area of application
For vehicle washing in all truck and commercial vehicle wash stations and for manual vehicle washing. It can also be used as a pre-cleaner applied by sprayer or high-pressure device.
In the airport area, it is ideally suited for the cleaning of ground equipment, passenger buses and vehicles on the apron.
In the car wash, the shampoo is used undiluted and fed into the wash cycle via the existing dosing pump. The pump should be adjusted so that a truck consumes approx. 30-50 ml of product per wash cycle and a passenger car approx. 10-20 ml.
For manual application, the product can be diluted up to 1:200 depending on the degree of soiling of the vehicle. When spraying on vertical surfaces, the product should always be applied from the bottom up, in order to avoid "streaks". After a short period of action (max. 5 minutes), rinse with a strong water jet or with a high-pressure device.
The shampoo can also be used for immersion cleaning.
Density (20° C): approx. 1.05 kg/l (1 l corresponds to 1.05 kg)
pH value: approx. 9.9
Non-ionic surfactants, phosphates
Other components: Fixing agents and odorants.
Classification according to the Dangerous Substances Regulation
Xi - irritant
For R-phrases and S-phrases see safety data sheet.
The quality of the product is not affected by frost.
Concentrate, German water hazard classification: WGK 2 = pollutant (internal classification) ;
in application: WGK 1 = slightly water endangering (internal classification).
In the prescribed application concentration, easily separable in the waste water system.